This 3-tiered wedding cake was all draping with bunches of fresh purple and white flowers. When Monica told me what she wanted, I was a little skeptical. Okay, I was REALLY skeptical. I was afraid that the full draping wouldn't look right. I'm glad we went forward with the concept though because I ended up loving this design. This was a 6-10-14 inch round cake but it doesn't look as big as it actually was. The wedding cake was covered in all marshmallow fondant and then I placed toothpicks where the fresh flowers needed to go.
The wedding was held at the Capital Building in Salt Lake City, which was a journey in and of itself! I had to deliver 3 wedding cakes that day so I was on a time crunch. We pulled up to the back of the building and went inside to scope out the location. It was upstairs and quite a bit away from where we were parked (illegally parked, I should mention) so I knew we wouldn't be able to carry the cake that far. I searched down a caterer to ask if they had a push cart we could use... and 30 minutes later, we finally had one. We slowly rolled the cake over to the reception area (every bump in the tile flooring was exaggerated with the cake on this push card) and my hubby ran back to the car to move it since we were parked illegally... outside of the Capital Building. Haha. Ironic. Anyway, I was trying to put the flowers on as quickly as possible since I heard the music starting and all of the wedding guests were awaiting the bride's walk down the stairs (it's nerve racking finishing a cake with a crowd of people surrounding you). I finished the look, snapped off some pictures, and ran away as fast as I could to see if we had a parking ticket (luckily we didn't). Phew! The cake turned out better than I could have ever imagined.
The top was Lemon raspberry cake, the middle was Smore's Cake and the bottom was Ruby Red Velvet cake. All marshmallow fondant draping... and it was HEAVY! haha. One more thing. When making this cake, it was quite possibly one of the ugliest cakes I've ever made until the put the flowers on it. It looked naked... and sad. Once those flowers were on though, gorgeoud! :)
Tuesday, January 22, 2013
Sunday, January 13, 2013
Wood Grain Wedding Cake
Elaine wanted a wood grain wedding cake to match her beautiful venue up in Millcreek Inn. At this point, I had done a few wood grain cakes but I wanted to try a new technique. This cake is all buttercream with a marshmallow fondant border, bows, and pine cones. I frosted the cake a few times and let the buttercream set up. Then, I went over the cake with a modeling tool to create the grooves to look like wood grain. Then, I took brown food coloring and traced over the grooves with the color. I used a much wider brush and a bit of water to smooth out the color to give a much lighter wood grain color throughout the tiers. I darkened the tops of each tier, then added the forest green marshmallow fondant border and pine cones. I wish I could take credit for the base but that was provided by the wonderful bride and groom. That piece of real wood weighed A TON! I wasn't strong enough to put it into the car or carry it up to the venue myself! But it was so beautiful with the cake, and therefore totally worth it. :) Oh, and the whole cake was Can I Have Smore's Cake (You can check out my full flavor list at www.SaltCakeCity.com)
Mini Wedding Cake
I love this little mini-wedding cake! I did Suzanne's daughters wedding cake earlier in the year and then her son was getting married as well! That's one busy mama! She wanted a much smaller wedding cake for this second wedding and we came up with this little baby. Isn't it adorable? It's covered in marshmallow fondant and I believe it was Vanilla Latte Cake. Yum!
Categories
polka dots,
Round,
Wedding
Let's Talk Groom's Cakes!
I love when brides surprise their new hubbies with groom's cakes totally tailored to their likings. It's SO much fun to match a very elegant wedding cake with a much less elegant, and oftentimes explanation-less cake that even I don't understand! haha... don't worry, we'll get there.
First up is this golf groom's cake. There was a very long discussion at the cake tasting on making a unique groom's cake rather than the same-ol-golfer on top of an argyle cake. I LOVED making this cake because it really was just one giant brainstorming session on making this cake totally different. Maren & her lovely mother, Betsy, helped come up great ideas, sketch ideas, colors, design, etc. for this lil' guy (actually, it was a huge cake :) The cake had red rocks on the backside along with a sand trap (made of brown sugar and graham crackers) and a water hazard. Oh, so much fun!Next up we have a Minnesota Vikings Football groom's cake. ShiAnne wanted another unique groom's cake idea, not just the normal football shaped cake. We went with a topsy turvy design covered in marshmallow fondant with edible sugar balls coming out of the cake. Again...So... Much... Fun!
Now we have a cake that needs some explanation. Do I know what this is? Not really... haha. If you're a Star Wars mega-fan you might recognize this as a Slave One. Yup, otherwise to the rest of you, google Slave One and you'll see what I was going for :) This really was quite a challenge because the whole thing was edible so I had to structure it correctly to have the top part hanging out of the top but not sag or fall over. I hand painted the colors on here to get them as close as possible to the Slave One I was going after. Ah... this was a challenge indeed but I do appreciate the challenge... thank you, KiElys!
Next up is a snowmobile. Katie wanted to display her hubby's favorite snowmobile all out of cake. This cake was covered in marshmallow fondant and again, hand-painted to get the right colors for the exact snowmobile I was going for. The windshield was exceptionally difficult to get to stand up correctly but worked out in the end :)
Lastly, we have an Adidas shoe groom's cake. The bride wanted to surprise the groom (and we went to great lengths to hide this puppy until after the wedding) with this all cake shoe covered in marshmallow fondant. Yup, I hand painted the stripes and logo on here after putting the right grooves in the front of the shoe and after adding the laces. It's funny to recreate something real because I want it to be as exact as possible while still looking edible. Loved making this shoe! Thank you, Danielle, for allowing me to make such a fun groom's cake for your hubby!
Categories
3-D,
Fondant Figurines,
Groom's Cake,
Hand-painting,
Round,
sports,
topsy turvy,
Wedding
Thursday, January 3, 2013
Princess Jasmine's Wedding Cake
Yes... this is actually Princess Jasmine's Wedding Cake! So it turns out that Disney created wedding cakes for some of their princess including Cinderella, Sleeping Beauty, and Jasmine. My bride was also Princess Jasmine (like... really... Princess Jasmine) at Disney World so she thought it fitting that she have Princess Jasmine's wedding cake too! Being a huge Disney fan, I was thrilled to make this cake!
This cake was really a labor of love. It was SO heavy that I had to transport it in two pieces and assemble on site.... down a hill... in a light rain.... in front of the guests. It was all covered in marshmallow fondant and then I used edible gold shimmer for the middle tier and all of the gold accents. It's hard to see in this picture but I hand rolled and placed the white fondant scroll details on the top, 4th, and bottom tiers. Took forever and ever to get the designs spaced correctly around each tiers.
Honestly, the best part of making this cake was working with the bride and her mother. Her mother, Betsy, makes the most beautiful vintage dresses (http://modestcouturebyelizabeth.com/) and even made the bride's wedding dress. They were just as excited about this cake as I was... which always helps the process. It turned out exactly how I hoped it would... even in the rain :)
This cake was really a labor of love. It was SO heavy that I had to transport it in two pieces and assemble on site.... down a hill... in a light rain.... in front of the guests. It was all covered in marshmallow fondant and then I used edible gold shimmer for the middle tier and all of the gold accents. It's hard to see in this picture but I hand rolled and placed the white fondant scroll details on the top, 4th, and bottom tiers. Took forever and ever to get the designs spaced correctly around each tiers.
Honestly, the best part of making this cake was working with the bride and her mother. Her mother, Betsy, makes the most beautiful vintage dresses (http://modestcouturebyelizabeth.com/) and even made the bride's wedding dress. They were just as excited about this cake as I was... which always helps the process. It turned out exactly how I hoped it would... even in the rain :)
Categories
Hand-painting,
Round,
shimmer,
Wedding
Red & Orange Cherry Blossom Cake
Rissa & Jasper were having a fall wedding but knew they wanted a cherry blossom flower cake so we joined the two ideas and came up with this red & orange cherry blossom wedding cake. The branches and flowers are all sugar as well! They chose Truffled Chocolate Cake and Tuxedo Cake with chocolate chips... yes, this couple loves their chocolate :) Since then, Rissa has ordered the Tuxedo cake a few times... sometimes, pregnancy cravings really need to be fed with cake! haha. Congrats on the baby, you two :)
Penguin Wedding Cake
Norman is from the east coast and wanted to surprise his fiance with a penguin wedding cake for their wedding out here in Utah. She loves this penguin stuffed animal she has and so he sent me pictures of it and I modeled this cake as closely as possible to the stuffed animal. The whole thing is cake and covered in marshmallow fondant and then I hand-painted the coloring to match the toy. The cake had three flavors inside of the little guy, Mom's Apple Pie Cake, Southern Butter Pecan Cake, and Ruby Red Velvet Cake. He was surprisingly heavy! haha
Categories
3-D,
animal print,
Hand-painting,
Wedding
Bring on the Damask!
This last wedding cake was for Meri's wedding. She had seen a cake I did last year with the same design and said it was perfect so we recreated it for her wedding. The whole cake was marshmallow fondant and then I shimmered the stripes on the top tier and shimmered the middle and bottom tiers. I used buttercream again for the damask patterns on the bottom and then accented the cake with fresh roses. Meri chose Banana Nut Cake, White Almond Wedding Cake, and Lemonberry Cake. You can see my full flavor list at www.SaltCakeCity.com
Subscribe to:
Posts (Atom)